Airbagit Street Scraper User Manual download pdf (Page 3)

23. With all mounting hardware tightened cut out factory frame pieces inside of notch

directly over axle.

24. Install air fitting on airbag and mount air bag to FRAME SECTIONS and

LOWER TOP BAG BRACKET.

25. Remount wheels.

26. Using floor jack raise rear of truck and remove jack stands. Lower down truck.

27. Add and remove air to bags and articulate suspension.

28. Adjust pinion angle to factory specs at ride height with adjustable heim joints on

UPPER LINK BARS and LOWER LINK BARS.

29. Using bed mounts as reference points, measure and cutout bed floor to clear street

scraper and remount bed.

Check bed for weak points in bed and bed sides needing reinforcement due to bed being

cut. Reinforce these points as necessary.

General Street Scraper

Parts List

x 2 – Frame sections ( right and left)

x 1 - Front cross member

x 1 - Upper cross member

x 2 - Lower bag mounts

x 2 - Lower link bars

x 2 - Upper link bars

x 1 - Differential housing link mount

x 2 - Axle link bracket

x 2 - Triple 2600lb bag

x 2 - 2000 LL shocks

Hardware List

x 20 - ½”-13 x 11/4” Bolts

x 10 - ½”-13 x 1 ½” Bolts

x 30 - ½”-13 C-lock Nuts

x 60 - ½” Flat washers

x 4 - 9/16”-12 x 4” Bolts

x 3 - 9/16”-12 x 6 ½” Bolts

x 7 - 9/16”-12 C-lock Nuts

x 14 - 9/16” Flat Washers

1 2 3 4 5

No comments

Airbagit Street Scraper User Manual Page 3